Thomson Bearings

Thomson Precision Steel Ball Bushing* Bearing  offer
thomson bearings A coefficient of friction as low as .001. When replacing high friction plain bearings, Precision Steel
Ball Bushing bearings dramatically improve machine productivity and efficiency.
thomson bearings All-steel construction, for maximum system rigidity.
thomson bearings Two accuracy classes allowing for immediate improvements in system positioning and repeatability.
thomson bearings Availability in fourteen bore sizes and nine configurations.
thomson bearings The RoundRail* Advantage which minimizes installation time and cost.
thomson bearings Steady state travel speeds up to 10 ft/s and accelerations to 450 ft/s2 without the use of derating factors.
thomson bearings An operating temperature up to 600º F.
thomson bearings Availability in a self-aligning pillow block housing for ease of installation and use.
thomson bearings Worldwide availability from over 1800 authorized distributors.
Thomson Super Ball Bushing Bearings (Closed type)
thomson bearings Available in sizes 3/16 to 2 inch diameter.
thomson bearings Load Capacity range from 35 to 3,000 lbf.
thomson bearings Self-aligning in all directions.
thomson bearings Can be mounted in a custom housing.
thomson bearings Can be adjusted to take out diametrical clearance.
thomson bearings Travel speeds up to 10 ft/s.
thomson bearings Available with corrosion resistant components.
Thomson Super Ball Bushing Bearings (Open Type)
thomson bearings Available in sizes 1/2-2 inch diameter.
thomson bearings Load capacity ranges from 230 to 2,350 lbf.
thomson bearings Self-aligning in all directions.
thomson bearings Can be adjusted to take out diametrical clearance.
thomson bearings Can be mounted in customized housing.
thomson bearings Travel speeds up to 10 ft/s.
thomson bearings Available with corrosion resistant components.
Thomson Sealed Super Ball Bushing Bearings (Closed type)
Integral double acting seals retain lubrication and keep out contamination.
Available in sizes 1/2, 3/4 and 1 inch nominal diameter.
Load capacity range from 255 to 1,050 lbf.
Self-aligning in all directions.
Can be adjusted to take out diametrical clearance.
Can be mounted in a custom housing.
Travel speeds up to 10 ft/s.
Available with corrosion resistant components.
Thomson Sealed Super Ball Bushing Bearings (OpenType)
Standard integral double acting seals retain lubrication and keep out contaminants.
Available in sizes 1/2, 3/4 and 1 inch diameter.
Load capacity ranges from 230 to 780 lbf.
Self-aligning in all directions.
Can be adjusted to take out diametrical clearance.
Can be mounted in customized housing.
Travel speeds up to 10 ft/s.
Available with corrosion resistant components.
Thomson Super Ball Bushing Bearing Pillow Blocks (Closed Type)
Available in sizes 1/4 to 2 inch diameter.
Load capacity range between 60 and 3,000 lbf.
Available with standard integral double acting seals.
Travel speeds up to 10 ft/s.
Available with or without diameter adjustment capability.
Easily mounted and secured with four mounting bolts (sizes 1/4 and 3/8 secured with two mounting bolts).
Available with a standard lubrication access.
Thomason Super Ball Bushing Bearing Pillow Blocks (Adjustable Type)
Available in sizes 1/4 to 2 inch diameter.
Load capacity range between 60 and 3,000 lbf.
Available with standard integral double acting seals.
Travel speeds up to 10 ft/s.
Available with or without diameter adjustment capability.
Easily mounted and secured with four mounting bolts (sizes 1/4 and 3/8 secured with two mounting bolts).
Available with a standard lubrication access.
Thomson Super Ball Bushing Twin Pillow Blocks (Closed Type)
Available in sizes 1/4 to 1 1/2 inch diameter.
Load capacity range between 120 and 4,000 lbf.
Available with standard integral double acting seals.
Travel speeds up to 10 ft/s.
Available with or without diameter adjustment capability.
Easily mounted and secured with four mounting bolts.
Available with a standard lubrication access.
Thomson Super Ball Bushing Cartridge Bearings
Available in sizes 1/4, 3/8 and 1/2 inch diameter.
Can be easily installed into a soft or slightly out-of-round housing.
Available in both single or twin versions and with or without integral double acting seals.
Single versions are self-aligning in all directions.
Twin versions minimize installation time and cost.
thomson bearings Available with corrosion resistant components.
Thomson Miniature Instrument Ball Bushing Bearings
thomson bearings Available in sizes 1/8, 3/16 and 1/4 inch bore diameter.
thomson bearings Available with matching 60 Case LinearRace* sets.
thomson bearings Coefficient of friction as low as .001.
thomson bearings Compact size for low inertia and weight.
thomson bearings Precision bearing balls, sleeve and 60 Case Linear Race manufactured of corrosion resistant stainless steel.
thomson bearings Load Capacity range between 7 and 19 lbf.
Thomson Die Set Ball Bushing Bearings
thomson bearings Available in sizes 1, 1 1/4, 1 1/2 and 2 inch bore diameter.
thomson bearings Load Capacity range between 350 and 1,100 lbf.
thomson bearings All steel construction for maximum rigidity.
thomson bearings Travel speeds up to 10 ft/s.
thomson bearings Easily mounted by simply bolting toe clamps in place.
thomson bearings Can be mounted perpendicular to mounting surface.
thomson bearings High operating temperature capability.
thomson bearings Coefficient of friction as low as .001.